.png)
We work in extreme locations endure extreme weather, meet extreme deadlines
Gode Wind 3 – Offshore Mechanical Works
Offshore bracket cutting works on foundations at the Gode Wind 3 offshore wind farm for RT9.
Belwind – Offshore Service and Blade Repair
Offshore turbine service and blade repair works at the Belwind offshore wind farm for GE Vernova.
Prinses Amalia – Major Component Exchange
Major component exchange works at the Prinses Amalia offshore wind farm for Deutsche Windtechnik.
Merkur – Offshore Lifting Supervision
Lifting supervisors for offshore works at the Merkur Offshore Wind Farm for GE Vernova.
.jpg)
Merkur – Offshore Corrosion Protection Campaign
Offshore corrosion protection and coating works on turbines at the Merkur Offshore Wind Farm for GE Vernova.
Vineyard Wind – Generator Coil Exchange Campaigns
Offshore generator coil exchange support for GE Vernova at Vineyard Wind, in several campaign phases.
Dogger Bank – Generator Coil Exchange Support
Technicians supporting GE Vernova's generator coil exchange works on Haliade-X turbines at Dogger Bank.
Bałtyk 2 & 3 – Site and Works Management
Site managers and works managers supporting contractors delivering the Bałtyk 2 & 3 offshore wind projects.
.png)
Baltic Power – Boat-Landing NDT and Quality Assurance
Non-destructive testing of boat landings and quality assurance support for Baltic Power.
Baltic Power – Commissioning, HV Control and Electrical Works
Commissioning personnel, HV control engineering, LV measurements and network equipment installation for Baltic Power.
Baltic Power – Construction Management and Site Teams
Construction management support and offshore site technicians working inside Baltic Power's own project organisation.
Baltic Power – Marine Coordination and Port Agency
Marine coordination staff for the marine coordination centre and port agency services for Baltic Power's offshore construction.
Baltic Power – Client Representation for Monopile and Turbine Installation
Owner-side representatives during monopile installation, turbine installation and rock placement on Baltic Power.
Baltic Power – Client Representation for Offshore Cable Installation
Owner-side client representatives on board during cable laying, pull-in, burial and trenching for Baltic Power.
Rope Access Blade Inspections for QAIR in Poland
In 2023, we delivered blade inspection services for QAIR on 26 Vestas wind turbines across Poland.
Baltic Power – from construction to operation
Baltic Power is Poland's first offshore wind farm, 1.2 GW, built by Orlen and Northland Power. The owner needed experienced people on its own side through construction and commissioning, plus reliable marine coordination close to the site in Łeba and Ustka.
Coating Repair Following Burnt Coil Incident on Merkur Offshore Wind Farm
In 2024, Ventum performed specialist coating repairs at the Merkur Offshore Wind Farm, following a burnt coil incident inside a wind turbine generator.
Installation of Bird Monitoring System Components for Baltic Power Offshore Wind Farm
In 2025, we supported DHI with installing components of their bird monitoring system for the Baltic Power Offshore Wind Farm.
Blade Inspection Works at Borkum Trianel Offshore Wind Farm
In summer 2024, Ventum was awarded a blade inspection campaign at the Borkum Trianel Offshore Wind Farm in the German North Sea.
Documentation Engineering Support for Haliade-X Wind Turbines
In 2024, we provided engineering support for GE Vernova’s Haliade-X platform in Nantes, France.
Coil Exchange and Brazing on Haliade-X Prototype in Rotterdam
In 2024, we partnered with GE Vernova to perform specialized generator repairs on the Haliade-X prototype in Rotterdam.
Installation of Bird Monitoring System on Baltic Eagle Offshore Wind Farm
In 2025, we supported DHI with the installation of an advanced bird monitoring system at the Baltic Eagle Offshore Wind Farm in the Baltic Sea.
Internal Wind Turbine Cleaning at Merkur Offshore Wind Farm
In 2024, we carried out a comprehensive internal cleaning campaign at the Merkur Offshore Wind Farm in the German North Sea.
Rope Access Retrofit Works on Concrete Wind Turbine Towers
Over several months, Ventum supported Max Bögl GmbH with retrofit works on Nordex concrete towers across multiple sites in Germany.
HSE Support for Fuqing Offshore Wind Farm
Between late 2023 and early 2024, we delivered HSE support for the corrective maintenance campaign at the Fuqing Offshore Wind Farm in China.
Onshore Blade Repair Campaign
Our collaboration with Siemens Gamesa evolved from ad hoc support to a large-scale blade repair campaign across Poland in the summer of 2025.
Mechanical and Coating Works on Arcadis Ost 1 Offshore Wind Farm
Germany’s rapid offshore expansion brought Ventum the opportunity to support the Arcadis Ost 1 Offshore Wind Farm during its installation phase, starting in 2022.
Electrical Inspections and Retrofits on GE Cypress Units in Lithuania
For this project, we were tasked with inspections and maintenance on 98 GE Cypress turbines—some of which also required minor electrical retrofits.
Service Support on GE Haliade-X Prototype Bearing in Rotterdam
In summer 2023, GE Vernova approached Ventum with an urgent request for technical support on their Haliade-X prototype in Rotterdam—the world’s largest offshore wind turbine.
First Offshore Wind Farm in France to Receive Blade Repairs from Platforms
For the second year in a row, we mobilized to the Biscay Bay to work on the Saint-Nazaire Offshore Wind Farm—the first offshore site in France to undergo blade repairs from platforms.
Ventum sp. z o.o. cares about your privacy.
Learn how we process personal data and use cookies – Privacy/Cookies Policy